Can you imagine your house without any bathrooms or toilets? This might be enough to make you cringe at the mere thought of it. Given this importance, common toilet repairs can successfully be completed by anyone, although expertise on bathroom renovations Melbourne and other local professionals provide are necessary most of the time. But if you’re concerned with the bathroom renovation quotes for repairs, you would most probably try your best to handle your toilet troubles on your own. This article talks about how to repair toilets for beginners.
Understanding how the toilet works
First of all, you need to get familiar with how a toilet works. Having the familiarity will help you feel almost like an expert of bathroom renovations Melbourne has now since preparedness is key. Not to mention you can save on bathroom renovation costs for repairs when you do it on your own. Flushing it makes a little arm pull a rubber flapper up and lets the water drain down. The water draining into the toilet bowl forces the old water out along with the number two or number one waste and extremities. Flush toilets are generally very simple mechanisms that have not changed much since they were first invented. The toilet’s tank on the back is filled with water and there is usually a float controlled valve that stops the water flowing into the tank when it is full – this is called the ballcock valve.
Fixing a leaky toilet
If the toilet sounds like it is running, there is a good chance that the seal between the rubber flapper and the plastic ring at the bottom of the toilet is broken somehow. The sound you are hearing is water running around this ring and into the toilet bowl. This leak is actually causing no damage to the toilet itself but is wasting water. Hence the water bill will be a little higher if you don’t fix the leaking toilet. The best way to find out if this is actually your problem is to take the toilet tank lid off. Here are some further instructions:
1. Stick your hand down into the toilet bowl and press gently on the rubber flap. This is your problem when the water stops leaking or starts running faster.
2. Turn the water off in the toilet. There will be a shut-off valve on the wall under your toilet bowl in the bathroom.
3. After you turn the water off, remove the plastic flap and examine it.
4. Look for a warped toilet flap or of some sort or grooves on the flapper itself.
5. Take the toilet flapper down to stores selling parts for bathrooms Melbourne has in your area and buy a new one. There are few parts to a toilet and most parts can be purchased at your local hardware or home improvement centers. Toilet repairs like this can be made simple and the parts used to replace are inexpensive. But if you need extra help, it is always good to hire experts on bathroom renovations Melbourne has today.
6. Go home and replace the new toilet flapper and this should solve most of your leaking toilet problems.